LABORATORY B.O.D. INCUBATOR

Specification:
• USICO Scientific made Double wall construction BOD Incubators. Inner chamber made of richly stainless steel sheet (304 grade) and Exterior made out of thick mild steel sheet duly finished in white Powder coated Supplied with two/three removable perforated shelves.
• Outer double wall door is provided with a magnetic gasket and lock & key arrangement. The inner door made out of clear acrylic sheet allowing inspection of material in the chamber without distributing the chamber temperature.
• The gap between the wall of equipment is filled with glass wool for temp. Insulation. The cabinet is mounted on caster lockable wheels.
• Temperature is controlled by Digital PID Controller from 5° C to 50° C ±1° C. for lower temperature.
• Working a standard cooling unit with a sealed compressor with the protective device has been provided below the chamber for safe and efficient working. The heating arrangement has been made within the chamber for higher temp.
• Working the temp. can be regulated within the range by means of a high precision double action thermo-regulator. Inner air circulating system is provided to achieve the uniform temperature in the whole chamber.
• A control panel is provided with various indicators, on-off switch, Double display, membrane keypad, Digital PID Controller. Supplied with cord and plug etc.
• The Equipment is workable on 220 V AC 50 Hz single phase.

Chamber Size : Capacity : Capacity
830 x 505 x 415 mm :  6.0cft : 171 Littre
865 x 565 x 565 mm : 10.0cft : 280 Littre
650 x 580 x 900 mm : 12.0cft : 336 Littre
900 x 650 x 700 mm : 15.0cft : 420 Littre

Packaging Details:
Packing in wooden patty with Thermocol insulation between Incubator & wooden patty -2 inches